WEMARS 62cc Gas Chainsaw 20 Inch Power Chain Saws 2 Stroke Handed Petrol Chainsaws Gasoline Chain Saw Garden Tool for Cutting Wood Outdoor Home Farm Use (WS-6220C)

WEMARS power chain saws quickly cut a cord of wood . or used to trim medium to large-size branches with the simple push of a button. 62cc 20-inch Bar Gas chainsaw Engine 2 Cycle Chain Saw is the ideal tool for farm . garden and home use. The built-in safety switch prevents accidental activation

Note:
Please read this handbook carefully before using the tool Intended use

Specifiction:
Displacement: 62cc
Output power: 2.5kw 3.4hp 8500rpm
Bar Length: 20"
Saw Chain Pitch: 0.325(inch)
Saw Chain Gauge: 0.325(inch)
Fuel: Mixture(Gasoline25:Two-cycle oil 1)
Fuel Mix: 25:1 (25 parts fuel to 1 part two stroke oil)

Tips
How to use the chainsaw:
1.Pull the Throttle Control Drawbars to Close the Throttle
2.Push the Fflameout Switch to the Starting Position (I)
3.Pull the starting handlebar outward several times until there's ignition sounds. Reset the throttle control drawbars and open the choke and start the handle repeatedly until the engine starts
4.Press the Trigger and Release the Engine to Idle
5.Place the Flameout Switch at (o) to Turn Off the Engine
Note: After the first ignition sound . closing the choke and repeatedly pulling on the start handle will suck in too much fuel and prevent the engine from starting

How to Install Chain:
1. Open the side cover
2. Check the saw blades . which are fixed with a cover on the clutch
3. Installation saw chain . Pay attention to the direction of the knife
4. A brake shoe moves to the side. Carefully watch the grooves that create the tension of the chain part
5. Close the side cover and adjust the tightness of the chain saw . which is about 0.4-0.6 inch
6. Locking side cover

Included Components:
1 X 20" 325''76DL Guide bar
1 X 20"325'' Saw chain
1 X Tool kit
1 X 2L Fuel Mixing bottle
1 X Instruction Manual
1 X Chain saw installation step
1 X Guide for start-up of chain saw